How to Replace the Steering Module on a Speedster

Quick answer

You can replace the steering module on a Baghera Speedster by removing the old unit, installing the genuine Baghera Steering module for Speedsters, and tightening all fasteners to factory torque.

Step-by-step replacement

1. Remove the steering wheel: Turn the car upside down. Locate the screw or nut securing the steering wheel to the steering column. Remove it with a Phillips screwdriver or 10mm socket. Pull the steering wheel off the splined shaft. Common mistake: forcing the wheel off without loosening the fastener can strip the splines. If stuck, spray a little penetrating oil and wait 5 minutes.
2. Detach the old steering module: Under the car body, find the steering module mounted to the chassis. Unscrew the two or three bolts holding it in place. Slide the module off the steering column and disconnect any linkage to the front axle. Checkpoint: note the orientation of the module before removal so you install the new one the same way.
3. Install the new steering module: Position the Baghera Steering module for Speedsters onto the steering column and align it with the mounting holes. Slide the linkage onto the front axle pin. Hand-tighten the bolts, then torque them evenly with a wrench. Common mistake: overtightening can crack the plastic housing. Tighten until snug, then give each bolt an extra quarter turn.
4. Reattach the steering wheel: Place the steering wheel back onto the splined shaft. Align it straight ahead. Secure it with the original screw or nut. Tighten firmly but avoid stripping the threads. Checkpoint: test the steering range by turning the wheel lock to lock. It should move freely without binding.
5. Test the repair: Flip the car right-side up. Have your child sit in it and steer while you watch the front wheels. The wheels should turn smoothly in both directions with no clunking or excessive free play. If you feel a dead spot or hear clicking, double-check that the module is fully seated and the linkage is properly connected.

What you need

• Steering module - Speedsters: The Steering module for Speedsters is a Baghera spare part intended for the Speedsters range, listed under Pièces Détachées with a 50% tag. Using the genuine Baghera part ensures correct fitment and durability, avoiding the wobble or stiffness that off-brand modules can cause.