What the Baghera wooden ladder set actually is
The Baghera wooden ladders set is a spare-parts item: two wooden ladders listed under Pièces Détachées for Baghera pedal cars and ride-ons. It is not a universal accessory, and the listing does not name specific models or describe a mounting method. That matters before you buy or drill anything.
Treat the set as a replacement or add-on for a Baghera ride-on that is designed to take these ladders. If you are unsure whether your model accepts them, check the original product documentation or contact the retailer before ordering. The catalog confirms the contents and brand, but it does not confirm fit across every pedal car.
Catalog facts to check before you start
- Wooden ladders (set of 2): Set of 2 wooden ladders, Baghera, category Pièces Détachées (spare parts), SKU Standard, code 1871. Confirms you are ordering two ladders as a spare-part set, not a complete mounting kit.

Wooden ladders (set of 2) - Wooden ladders (set of 2): Offered as a spare part for Baghera pedal cars and ride-ons. Signals intended use with Baghera ride-ons, but the listing does not list specific compatible models.
A safe sequence for attaching the ladders
The catalog does not include installation instructions, so the steps below are general good practice for attaching wooden accessories to a ride-on. Adapt them to your specific pedal car and stop if anything feels forced.
- 1. Confirm the mounting points on your ride-on: Look for existing holes, brackets, or a rack area on your Baghera pedal car where ladders are meant to sit. If there are none, the ladders may not be intended for your model.
- 2. Dry-fit both ladders before fixing anything: Hold each ladder in place to check length, angle, and clearance. The set contains two ladders, so plan where each one goes and make sure they do not block wheels, steering, or the child's seating area.
- 3. Use the fasteners your ride-on already provides: The ladder set listing does not include screws, bolts, or brackets. Reuse the original hardware if you are replacing ladders, or use fasteners that match the mounting points. Do not drill new holes unless you have confirmed with the manufacturer or a professional that it is safe to do so.
- 4. Tighten, then check for movement: Fix the ladders securely, then gently push and pull each one. There should be no wobble. If a ladder shifts, stop and adjust the fixing rather than adding tape or padding as a workaround.
- 5. Do a final clearance and safety check: With the ladders mounted, check that no part protrudes into the child's legroom or the wheel path. Confirm the ride-on still steers and moves freely. If anything catches or rubs, reposition or remove the ladders.
What the listing does not tell you
The supplied information does not include a list of compatible Baghera models, a mounting template, or torque settings. It also does not state a maximum load for the ladders. Do not assume the ladders are load-bearing or safe to climb; they are decorative or utility parts for a ride-on, and the catalog gives no weight rating.
If you need model-specific fitment or installation instructions, ask the retailer or check the manual that came with your pedal car. Guessing at drill positions or fastener sizes risks damaging the ride-on and creating a loose part.
Keeping the wooden ladders in good condition
Wooden parts on a ride-on face weather, knocks, and the occasional puddle. The catalog does not supply a care routine, so these are sensible habits rather than manufacturer instructions.
- Wipe rather than soak: Use a slightly damp cloth to remove dirt, then dry the wood promptly. Avoid leaving the ladders wet or submerged.
- Check the fixings regularly: Wood can expand and contract with moisture, so recheck that the ladders are still tight after changes in weather or after heavy play.
- Store the ride-on under cover: If the pedal car lives outside, bring it under cover or remove the ladders for long storage to reduce weathering.
- Retire damaged ladders: If a ladder cracks, splinters badly, or becomes loose no matter how you tighten it, replace it rather than patching it. The set is sold as a spare part, so a fresh pair is the straightforward fix.
When to stop and ask for help
If your pedal car has no obvious mounting points, if the ladders do not sit flush, or if you are unsure about drilling, pause. A local bike shop or a handyman can often confirm whether a mounting solution is sound, and the retailer can tell you whether the ladders are intended for your specific model. It is better to leave the ladders off than to attach them in a way that could loosen during play.


