How to Install a Metal Bell on a Pedal Car Fireman

Quick Answer

To install a metal bell on a Baghera Pedal Car Fireman, position the bell bracket over the mounting hole on the steering column, insert the bolt from the underside, and tighten the nut securely. Use a wrench to avoid overtightening and cracking the bracket.

Installation Steps

1. 1. Gather Tools and Parts: You will need the metal bell with its bracket, a 1/4-inch bolt (about 1 inch long), a flat washer, a lock washer, a hex nut, and a wrench. Check that the bolt threads match the nut before starting. Using a bolt that is too long can block steering movement; test fit before tightening.
2. 2. Position the Bell Bracket: Place the bell bracket over the pre-drilled hole on the top of the steering column. The bell should face forward toward the driver. Ensure the bracket sits flat against the metal surface. If the bracket rocks or tilts, the hole may need a thin rubber washer to prevent rattling.
3. 3. Insert and Secure the Bolt: From underneath the steering column, push the bolt up through the hole and the bracket. Slide on the flat washer, then the lock washer, and thread the nut by hand. Tighten with a wrench until snug—do not overtighten. Overtightening can crack the bracket or strip the threads; stop as soon as the bell is firm and does not wiggle.
4. 4. Test the Bell and Steering: Press the bell lever to confirm it rings clearly. Turn the steering wheel fully left and right to ensure the bolt and bracket do not contact the frame or limit movement. If the bell does not ring, the lever may be bent; gently straighten it with pliers.

Product Facts

• Metal bell for Pedal Car Fireman: This metal bell is a Baghera spare part designed specifically for the Pedal Car Fireman ride-on, under reference 1870 in the Standard option. It ensures a perfect fit on the Fireman model without needing to modify the steering column or bracket.