How to Install the Hardware Set on a Classic Pedal Car Red

By Vintage Pedal Cars and Ride-Ons for Children - Baghera | Published: 2026-10-27

Category: How-to Guides

Step-by-step guide to installing the Baghera hardware set on your Classic Pedal Car Red. Includes common mistakes and checkpoints for a secure fit.

Quick Answer

Installing the Baghera hardware set on your Classic Pedal Car Red is straightforward: replace worn or missing hardware using the included bolts, nuts, and washers, following the original assembly pattern. This guide covers the key steps and common pitfalls.

What the Hardware Set Includes

The Baghera hardware set for the Classic Pedal Car Red (SKU 1891) is a spare parts kit containing replacement bolts, nuts, and washers. It is designed specifically for this model, so you can expect a perfect fit without modifications. The set does not include tools, so you will need a standard screwdriver and wrench.

When to Replace the Hardware

Over time, the original hardware on a pedal car can rust, loosen, or strip, especially if the car is used outdoors or stored in a damp area. Replacing the hardware restores structural integrity and prevents wobbling or detachment of parts like the steering wheel, seat, or pedals. If you notice any loose components or rusted bolts, this kit is the right solution.

Step-by-Step Installation

1. Prepare the Pedal Car: Place the Classic Pedal Car Red on a stable, flat surface. Remove any loose or damaged hardware using a screwdriver or wrench. Keep the original parts as a reference for placement. Check that all old hardware is removed before starting; leftover rusted bolts can interfere with new parts.
2. Identify the Hardware Pieces: Lay out the contents of the hardware set. The kit includes bolts, nuts, and washers of specific sizes. Match each piece to the corresponding location on the car (e.g., steering column, seat mount, pedal assembly). Do not mix up bolt sizes—using a wrong-sized bolt can strip the threads or fail to hold securely.
3. Install the Steering Hardware: Attach the steering wheel bracket to the steering column using the provided bolts and washers. Tighten the nuts with a wrench until snug, but avoid over-tightening which could crack the plastic column. Over-tightening is a common mistake; hand-tighten then give a quarter turn with a wrench.
4. Secure the Seat: Align the seat over its mounting holes. Insert the bolts through the seat and frame, add washers and nuts on the underside, and tighten evenly. Check that the seat does not rock. Tighten all seat bolts gradually in a cross pattern to avoid warping the seat base.
5. Attach the Pedals: Position the pedal arms onto the crank mechanism. Use the hardware set's bolts and lock washers to secure them. Ensure the pedals rotate freely after tightening. Test pedal rotation immediately—if they bind, loosen slightly and re-align before final tightening.
6. Final Inspection: Go over every connection: steering, seat, pedals, and any other fastened parts. Confirm all nuts are tight and no hardware is missing. Wipe away any metal shavings or debris. A final check prevents future loosening; re-torque after the first ride if needed.

Product Details

Hardware set for Classic Pedal Car Red: This hardware set is listed under spare parts and is intended for the Classic Pedal Car in Red from Baghera. It ensures compatibility: you can replace any standard bolt, nut, or washer on that specific model without needing to modify or adapt parts.
Hardware set for Classic Pedal Car Red